I-Automation Steel Coil Slitting Line 2 ~ 8mm * 1800mm
Iinkcukacha zeMveliso
| Inombolo yoMfanekiso | HZF-1800×8-HR-008 |
| Ukusika Ububanzi(m/umz) | 500-1800mm |
| Ukusika isantya(m/umz) | 12000-15000mm |
| Rated Power | 280KW |
| Ubunzima | ≤35T |
| O.D. | 2000mm |
| Ukutyeba kwezinto eziphathekayo(mm) | 2-8mm |
| Hayi. yeMigqaliselo yokuCandwa | 5-15 |
| Ubunzima bekhoyili(T) | 30T |
| I-Voltage | 220/380/440W |
| Ububanzi | 500-1800mm |
| I.D. | 508/610mm |
| Isantya | ≤120m/mz |
Ingcaciso yeMveliso
Imigca yentsimbi yokuqhawula i-coil: Imigca yokuqhawula i-longitudinal yokusika iikhoyili zetsimbi ze-jumbo zibe zikhoyili ezimxinwa ngakumbi. Ngokuqhelekileyo imigca yokuqhawula iqulethwe ngamacandelo amane: i-decoiler, slither, tensioner and ukurhoxa. I-Metal strip ityiswa kwi-decoiler, ngokusebenzisa i-slitter yokusika i-longitudinal ngamacangci amabini okusika ajikelezayo, kwaye emva koko zijijelwe kwakhona kwii-mults ezisikiweyo kwi-recoiler ngokusebenzisa i-tensioner.
Imigca yethu yokuqhawula inokuthi yenziwe kwaye yenziwe ngokusekelwe kwintsimbi engenasici, carbon steel, intsimbi ye-silicon, GI, PPGI, ubhedu, ubhedu kunye ne-aluminiyam; ububanzi uluhlu: 300~2000mm, uluhlu lokutyeba: 0.2~ 16mm, uluhlu lobunzima: 3~iitoni ezingama-40
Isicelo
| Yenziwe ngentsimbi eshayinayo (Zonke series) | Intsimbi yekhabhoni(HR okanye CR) |
| Ikhoyili enemibala (PPGI) | Ikhoyili yegalvanized(GI) |
| Aluminiyam, Ubhedu kunye nobhedu | Silicon steel |
Iinkcukacha
Itshathi eHambayo yeMigca yokuSika:
Ilayisha iikhoyili→i-decoiling→ ukupinkisha, umgangatho, kunye nokucheba→ ukuthunga→ ukukhokela → ukunqunqa → ukuphinda umva amaqhekeza
Inzuzo
Ixesha lokuzisa
a) Ixesha lokuhambisa li 60-180 iintsuku zokusebenza ngokusekelwe koomatshini ezahlukeneyo
b) ODM 60-150 iintsuku emva kokuba lonke ulwazi luqinisekisiwe.
c) Kuxhomekeke kubungakanani bomyalelo ezandleni
d) Ngokwemeko yokwenyani yemveliso, ixesha lokumiselwa kokuhanjiswa.
Reviews
There are no reviews yet.