Mpempe akwụkwọ eji egbutu igwe ruo ogologo ya na 4Hi Leveler 850x3mm
Nkọwa ngwaahịa
| Nọmba nlereanya | HZ-ZP-6H-850×3-003 |
| Ibu (KG) | 52 |
| Ogologo obosara | 300 – 4000 mm |
| Ịkwado nkenke(±mm/m) | 0.5 ±mm/m |
| Ogologo eriri igwe | 300-800mm |
| Ọkpụrụkpụ ihe(mm) | 0.3 – 3 mm |
| Voltaji | ahaziri |
| Ogologo mpempe akwụkwọ | 500-4000mm |
Nkọwa ngwaahịa
Bee ruo ogologo ahịrị bụ ịtụgharị ịkpụ coils n'ime mpempe akwụkwọ nke obosara yiri ya, ma dị iche iche ogologo dị ka PLC omume na-akpaghị aka tojupụtara ịkpụ Ibé akwụkwọ na ngwugwu. A na-ejizi mpempe akwụkwọ ndị a kpụrụ akpụ mee ihe maka ịkpụcha akụkụ ndị dị mkpa, na-ehulata na brek-pịa, laser, gas, ma ọ bụ ịkpụ plasma iji mepụta ngwaahịa dị larịị.
Cut to Length Line controlled by PLC, ịtọ data na ihuenyo mmetụ, na-arụ ọrụ dị ka ndabere data. Elu ịcha ziri ezi! High speed! Ọdịdị siri ike! Higher quality! Long life!
1. Raw material specification
|
1. Obosara eriri igwe: 300-1600mm |
2. Akụrụngwa: SS, Carbon ígwè, GI, PPGI, Ọla kọpa, Aluminom |
3. Ibu eriri igwe: 8-25 T |
|
4. NJ eriri igwe: 508, 610, 762MM |
5. Ọsọ ahịrị: 60m/min |
6. Usoro njikwa: Siemens/ABB |
|
7. Ụgbọala: AC ma ọ bụ DC |
8. Agba igwe: acha anụnụ anụnụ ma ọ bụ akwụkwọ ndụ akwụkwọ ndụ |
9. Mbupute kwa ọnwa: 800-2000Tọn |
2. Cut to length line Devices
|
1. Coil loading car |
2. Hydraulic decoiler |
3. Ọkwa (2ndewo, 4ndewo, ma ọ bụ 6 hi) |
4. Looping pit & akwa mmiri |
|
5. Nduzi & Nchọpụta ogologo NC |
6. Ọkpụkpụ hydraulic |
7. ebufe eriri |
8. Auto stacker |
|
9. Lift table |
10. Tebụl mkpọda |
11. Sistemụ hydraulic |
12. Electric control system |
3. Bee n'ogologo ahịrị okirikiri
Reviews
There are no reviews yet.