Yanke Zuwa Injin Tsayi tare da Leveler 6hi 2 * 1300mm
Cikakken Bayani
| Lambar Samfura | HZP-1300*2-CS-006 |
| Yanke Nisa(m/min) | 300-4000mm |
| Gudun Yankewa(m/min) | 5-60 |
| Ƙarfin Ƙarfi | Ba gyarawa ba |
| Nauyi | 65ton |
| Nisa na Coil | 300-1250mm |
| Kauri na Abu(mm) | 0.2-2mm |
| Nauyin Coil(T) | 15 Ton |
| Matsakaicin Matsayi(± mm/m) | 0.5 ± mm/m |
| Coil Raw Material | CR, SS, GAL, KARBON, KWANA |
| Girma(L*W*H) | Ba gyarawa ba |
Bayanin Samfura
Yanke zuwa Layin Tsawon shine a juye yanke yankan coils zuwa zanen gado masu faɗi iri ɗaya, amma daban-daban tsayi daidai da shirin PLC kuma ta atomatik tari yanke zanen gado akan fakiti. Sannan ana amfani da zanen gadon da aka yanke don yankewa zuwa ma'auni masu mahimmanci, lankwasawa tare da danna-birki, Laser, gas, ko yankan plasma don samar da samfuran lebur.
Cut to Length Line controlled by PLC, saitin bayanai a allon taɓawa, aiki kamar yadda saitin bayanai. Babban yanke daidaito! High speed! Tsari mai ƙarfi! Higher quality! Long life!
Ƙayyadaddun Abubuwan Raw
|
1. Faɗin naɗe: 300-1600mm |
2. Albarkatun kasa: SS, Karfe Karfe, GI, PPGI, Copper, Aluminum |
3. Nauyin nada: 8-25 T |
|
4. Kundin ID: 508, 610, 762MM |
5. Gudun layi: 60m/min |
6. Tsarin sarrafawa: Siemens/ABB |
|
7. Turi: AC ko DC |
8. Launin inji: blue ko kore |
9. Fitowar wata-wata: 800-2000Ton |
Yanke zuwa Na'urorin Layi na Tsawon
|
1. Motar nada kaya |
2. Na'ura mai aiki da karfin ruwa decoiler |
3. Leveler (2sannu, 4sannu, ko 6hi) |
4. Looping pit & gada |
|
5. Jagora & NC tsawon ganowa |
6. Na'ura mai aiki da karfin ruwa shear |
7. Mai ɗaukar belt |
8. Auto stacker |
|
9. Lift table |
10. Nadi tebur |
11. Tsarin ruwa |
12. Electric control system |
Yanke Tsawon Layi Mai Tsayi
Lokacin Bayarwa
a) Lokacin bayarwa shine 60-180 kwanakin aiki bisa na'urori daban-daban
b) ODM 60-150 kwanaki bayan an tabbatar da duk bayanan.
c) Ya dogara da adadin tsari akan hannu
d) Dangane da yanayin samarwa na ainihi, lokacin alƙawarin bayarwa.
Sharhi
Babu sake dubawa tukuna.